About | Product Features | Product Testing | Q&A | Application | Contact

Application Directions for Floors

Non-Glazed Ceramic Tiles

PRODUCT (included per kit)	Easy Green - 2 bottles @ 8 oz. each (green) NO-Slip - 2 gallons (clear) Grip Bond - 1 gallon (purple)
TIME NEEDED	2-3 hours for 1250 sq.ft. (includes cleaning floor) 3-4 hours for 2500 sq.ft. (includes cleaning floor)
LABOR	2 crew (over 1250 sq.ft. use 3 crew)
EQUIPMENT	2-5 gallon mop buckets with squeeze attachments 3 long handled mops (*new, dry mop heads*) 1 deck brush 1 long handled squeegee (if available) 1 wrist watch

IMPORTANT NOTES:
	works on ceramic tile, quarry tile, raised safety tile, cement, paver block, slate, granite	will not work on vinyl tile, paint, plastic, acrylic and silicone sealers, waxed surfaces, asphalt, wood

*do not apply if temperature is near or below freezing *do not apply if rain is expected during application

Contact NO-Slip before starting application.

Read and Understand These Directions Before Starting

  CLEANING FLOORS
(instead of regular cleaning procedure)

1. Remove/raise all loose seating, high chairs, equipment, boxes etc. and sweep area thoroughly immediately prior to starting application.
2. Pour 1 bottle of Easy Green in 5 gallon mop bucket - fill with hot water.
3. Mop entire area with Easy Green mixture - deck brush entire area if possible.
4. Rinse floor thoroughly with clean, hot water using 2nd mop bucket.
5. Allow floor to completely dry before proceeding to Step 2.

  APPLICATION

       Empty and rinse both mop buckets

*Pour entire gallon container of Grip Bond (dark purple color) into your mop bucket and add 2 gallons of hot water.

*Fill mop bucket with clean hot water.

Before you start, remember,

• Use a new clean and dry mop head for applying NO-Slip.
• DO NOT let any water come into contact with NO-Slip
• Wear the gloves that are provided in the kit.
• Clean dirt and grease from the bottom of your shoes and wipe them dry.

The area must be thoroughly DRY before applying NO-Slip

  APPLICATION OF NO-SLIP - leave ventilation fans (HVAC unit) on

1. Using clean, dry mop, start at one end of area.
2. Pour NO-Slip directly onto the mophead on the floor and slowoly spread generous, thick amounts throughout floor area being treated.
3. Note the time the crew starts applying NO-Slip and count 7 minutes on your watch.

IMPORTANT NOTES

1. DO NOT let NO-Slip dry. If you see dry spots, apply more NO-Slip immediately.
2. If you splash glass or metal clean it immediately with generous amounts of water.
3. Do not leave mop soaked with clear NO-Slip sitting directly on the floor after use.
   Put it on cardboard or plastic. After treatment you can rinse it with water and reuse.
4. Do not walk through treated area before or after Step 3.

  APPLICATION OF GRIP BOND

1. At 7 minutes, immediately apply a generous amount of Grip Bond solution to floor area with mop (from cleaning) starting at the same end and following the same path you applied NO-Slip. Bubbles help you see where you have applied Grip Bond.
2. Immediately after Grip Bond has been applied, you may start rinsing the floor with hot water beginning at the original starting point again, using the mop from cleaning.
3. Replace bubbly water in the bucket often with fresh, hot water.
4. Rinse floor twice.

Application Directions for Bathtubs/Showers

Ceramic and Porcelain Bathtubs, Shower Tile and Bathroom Floors

1. Clean surface being sure to remove all soap residue - Dry thoroughly.
3. Spread NO-Slip (clear) with a clean, dry sponge* evenly across the entire surface to be treated.
   Wait 7 minutes - do not let the NO-Slip dry.
4. Use a separate sponge* to spread Grip Bond (purple) evenly across the entire treated surface.
   Rinse thoroughly with hot water.

* or fill a clean, dry, spray bottle and spray keeping nozzle approximately 6 inches from the surface.

NOTE:
- Dilute Grip Bond (purple) 2 parts water:1 part Grip Bond
- Treat the deck edge around the bathtub as well as the bottom.
- We suggest wearing enclosed gloves and leave on ventilation.
- Use non-abrasive liquid cleaner to clean tubs and tile.